Working principle and advantages of jaw crusher

Date: 2019-10-17 Views:

PE, PEX series jaw crusher for large compound pendulum jaw crusher broken equipment, mainly used in crushing compressive strength less than 350 mpa in all kinds of hard ore and rock, big crushing ratio, high yield, uniform end product size, reliable operation, easy maintenance, low operating costs, this paper mainly introduces the working principle of the jaw crusher and advantage.

1. Working principle of jaw crusher

jaw crusher

PE, PEX series jaw crusher is powered by an electric motor and drives an eccentric shaft through a belt drive to make the moving jaw move reciprocating according to the predetermined track, thus crushing the materials entering into the crushing chamber composed of fixed jaw plate, movable jaw plate and edge protection plate, and unloading the finished materials through the discharge port at the lower part.The crushing mode of this series of jaw crusher is flexion extrusion type. The motor drives the belt and pulley to make the moving jaw move up and down through the eccentric shaft. When the moving jaw rises, the Angle between the bracket and the moving jaw increases, thus pushing the moving jaw closer to the fixed jaw.When the moving jaw goes down, the Angle between the bracket plate and the moving jaw becomes smaller, the moving jaw plate leaves the fixed jaw plate under the action of the pull rod and spring, and at this time, the broken materials are discharged from the lower mouth of the crushing chamber. With the continuous rotation of the motor, the broken motor jaw is used for periodic crushing and discharging, realizing mass production.

2. Performance advantage of jaw crusher

jaw crusher

(1) the jaw crusher adopts friction-free crushing mechanism. During the crushing process, the effect of the jaw plate on the material is pure extrusion pressure without relative sliding, so the jaw plate has a long service life.

(2) optimized the structure of the front plate, which deepened the crushing chamber of the jaw crusher and made no dead zone, increased the number of times the material was broken, increased the travel of the moving jaw, made the discharge smooth, and improved the crushing ability;

(3) high production efficiency, large crushing ratio, uniform product size and low energy consumption;

(4) shim type discharge port adjustment device, reliable and convenient, large adjustment range, increase the flexibility of the equipment;

(5) the jaw plate of jaw crusher is made of high strength manganese steel, which is cast in one time, with the characteristics of abrasion resistance, compression resistance and long life.

(6) simple structure, reliable operation, low operating costs, safe and reliable lubrication system, easy replacement of components;

(7) low noise and little dust.

If you need to purchase jaw crusher or cement production line, you can contact our online customer service, we are happy to answer your questions.

Project Cases

Send Message

Please input your inquiry in below form.

Name *



E-mail *

Message *