• Rod mill

    Feed particle size:≤30 mm

    Capacity:2-125 t/h

    Applicable materials:Quartz stone gold ore iron ore pyrrhotite copper ore and etc.

     

    Rod mill is a mill with steel rod as the grinding medium mainly used for rough grinding generally using wet overflow type can be used as a first class open circuit grinding;Especially suitable for brittle material used in production line with uniform particle size.

    Introduction
    Specifications
    Advantages

    Rod mill is asynchronous motor through the gear reducer and small gear coupling, turns around the big gear reduction, directly driven rotary rotary, barrel inner is equipped with the appropriate grinding medium - steel rods, grinding medium under the action of centrifugal force and friction force, to manufacture materials by feeding department continuously into the barrel inside, are controlled by the movement of grinding medium crushing, and the product through the power of the overflow and continuous feeding discharge outside, for the next working procedures.
     

    Type

    Feed Capacity
    size (mm)

    Discharge capacity
    size (mm)

    Production
    (t/h)

    Power
    (kw)

    Weight
    (t)

    Φ900×1200

    30

    0-5

    2-6

    18.5

    4

    Φ1200×2400

    30

    0-5

    5-15

    30

    11.5

    Φ1500×3000

    30

    0-5

    10-25

    75

    17

    Φ1830×3000

    30

    0-5

    18-45

    130

    26

    Φ2100×3000

    30

    0-5

    20-52

    180

    44

    Φ2100×3600

    30

    0-5

    30-70

    210

    46

    Φ2400×2000

    30

    0-5

    35-82

    245

    59

    Φ2700×3600

    30

    0-5

    50-125

    380

    82

    Note:According to different materials the production capacity is different
     


    1.Uniform product size
    When the material with coarse grains rises along the liner the rod mill makes fine materials pass through the seam which is also conducive to crushing the coarse grains and makes the coarse grains concentrated in the place where the grinding medium strikes. Therefore the product size of the rod mill is more uniform.
     
    2.The output particle size can be adjusted and the phenomenon of over crushing is less
    The particle size of the discharge can be changed through simple adjustment with built-in fineness control device and the discharge can be added with screening device. There are two checks to ensure that the unqualified products will not be mixed with the finished products.
     
    3.Large handling capacity and high yield
    In the process of grinding the grinding medium is in line contact with ore so it has certain selective grinding effect.Especially for coarse grinding the processing capacity of rod mill is much larger than that of ball mill of the same specification.
     

    Relevant Products

    Send Message

    Please input your inquiry in below form.

    Name *

    Tel

    Country

    E-mail *

    Message *