• Intermittent ball mill

    Capacity:0.65-615t/h

    Discharging granularity:0.074-0.89mm

    Applicable materials:Nickelite siderite copper ore and various metallic ores.

     

    Intermittent ball mill plays an important role in cement silicate products building materials and other fields

    Introduction
    Specifications
    Advantages

     
    Intermittent ball mill for horizontal cylindrical rotating device, outer gear transmission, two bin, grid type energy saving ball mill.The material enters into the first bin of the mill uniformly through the feeding device through the feeding hollow shaft spiral. There is a ladder lining board or corrugated lining board in the bin, and steel balls of different specifications are installed inside. The cylinder rotates to generate centrifugal force, which brings the steel balls to a certain height and then falls down, thus producing a heavy blow and grinding effect on the material.After the material is roughed in the first bin, it enters the second bin through the single compartment board, which is inlaid with flat lining board and contains steel balls to further grind the material.The powder is discharged through the unloading grates so as to complete the grinding operation.
     

    Type

    Loading weight
    (ton/time)

    Rotate speed
    (r/min)

    Power (kw)

    Liner material

    Φ900×1200

    0.2

    38.5

    5.5

    Ceramic silica
    rubber metal
    (Matching power
    according to the
    use of different
    lining material and
    grinding materials
    will be different)

    Φ1200×1500

    0.5

    33

    7.5

    Φ1500×1800

    1.2

    28.5

    11

    Φ1800×2000

    1.5

    24

    15

    Φ2600×2800

    5

    16.5

    37

    Φ3000×2800

    10

    14.5

    55

    Φ3200×4600

    15

    13.5

    75

    Φ3400×6600

    18

    13

    135



    1.With belt drive easy replacement low noise low price material filling rate can reach 80%.
     
    2.Intermittent ball mill is applicable to a wide range can be used for ordinary and special materials grinding according to the use of different liner and ball to grind different materials.
     
    3.The whole mill structure is in a whole making the installation and operation very simple and the stability of performance enhanced.
     
    4.Because it is intermittent work on the whole compared with other ball mills with the same specifications the power consumption and energy consumption are significantly reduced.
     
    5.The equipment is simple in structure and the failure rate of similar ball mills is low.
     
    6.Intermittent ball mill equipment operation intelligent set the running time automatically shut down in the outlet there is a fine screen can strictly control the fineness of finished products;
     
    7.Advanced manufacturing technology intermittent ball mill with high hardness flange on both sides to ensure the stable operation of the ball mill.
     

    Relevant Products

    Send Message

    Please input your inquiry in below form.

    Name *

    Tel

    Country

    E-mail *

    Message *