How to repair pulverized coal burner?

Date: 2019-07-24 Views:

Pulverized coal burner is a new type of furnace heating equipment, with high heat utilization rate, energy saving and environmental protection, etc.

Heating use of quenching furnaces, precision casting shell burners, melting furnaces, forging furnaces and other related heating furnaces.

The main maintenance steps of pulverized coal burner are as follows:


1. Firstly, check the bearing lubrication condition of the bearing room before and after the host machine. If grease is found, clean it and replace it with new grease.

2. Check the external bolts of the machine and make them firm;Check furnace interior for dirt removal and repair lining.

3. Open the main engine and check the wear condition of hammer. If the wear is serious, replace it with new parts;Check whether the connecting bolts of fan blades are loose and wear seriously. If they are loose, they should be strengthened or replaced.

4. Check whether the lining plate and the fixing bolt of the machine body are loose at the crushing part. The loosening should be firm, and the lining plate should be replaced if it is badly worn.

Project Cases

Send Message

Please input your inquiry in below form.

Name *

Tel

Country

E-mail *

Message *